Открытый конкурс Тендер №5759 от 25.11.2019 11:49

Наименование: на закуп в Египет арматуры трубопроводной, труб чугунных, трубопроводов из черной и нержавеющей стали более 200 тн

Закуп арматуры трубопроводной, труб чугунных, трубопроводов из черной и нержавеющей стали более 200 тн

доставка ЕГИПЕТ

Pipe 325х8, В 20 Seamless steel pipe (no welding), hot-deformed, round section,outer diameter 325 mm, wall thickness 8 mm, length to 12 м, without heat treatment, group B with standardization on chemical composition and mechanical properties, production accuracy - normal +/- 1.0%, pipe ends cut off under straight angle On the surface of the Pipes no cracks, film, flaws and laps are allowed.
Separate minor nicks, dents, risks, a thin layer of dross, traces of stripping defects and small caps are allowed, if they do not bring the wall thickness beyond the minus deflections. Pipe shall be able to withstand the bend test.
material: structural carbon steel of high quality, grade 20 (GOST 1050-2013), with carbon content of 0,17 - 0,24%, manganese 0,35 - 0,65% , silicon0,17 - 0,37% , phosphorus 0,035%, chrome to 0,25%, nickel, copper- 0,3%,Brinel hardness 156 MPa, tear resistance 412 MPa, yield strength 245 MPa,relative elongation at break21 %, weldability - no restrictions, flake susceptibility - insensitive.

Pipe 38х2,5, В 20 Seamless Steel pipe, cold-deformed, round section,outer diameter 38 mm, wall thickness 2,5 mm, length to 12 м, without heat treatment, group B with standardization on chemical composition and mechanical properties, production accuracy - normal +/- 1.0%, pipe ends cut off under straight angle On the surface of the Pipes no cracks, film, flaws and laps are allowed.
Separate minor nicks, dents, risks, a thin layer of dross, traces of stripping defects and small caps are allowed, if they do not bring the wall thickness beyond the minus deflections. Pipe shall be able to withstand the bend test.
material: structural carbon steel of high quality, grade 20 (GOST 1050-2013), with carbon content of 0,17 - 0,24%, manganese 0,35 - 0,65% , silicon0,17 - 0,37% , phosphorus 0,035%, chrome to 0,25%, nickel, copper- 0,3%,Brinel hardness 156 MPa, tear resistance 412 MPa, yield strength 245 MPa,relative elongation at break21 %, weldability - no restrictions, flake susceptibility - insensitive.

И так Далее

Лот 1: на закуп арматуры трубопроводной, труб чугунных, трубопроводов из черной и нержавеющей стали более 200 тн

Pipe 159х9, Ст20 Cold or heat-deformed pipe with an outer diameter of 159 mm, thickness
walls 9 mm, conventional accuracy, steel 20
Pipe 219х7, В 20 Seamless steel pipe (no welding), hot-deformed, round section,outer diameter 279 mm, wall thickness 7 mm, length to 12 м, without heat treatment, group B with standardization on chemical composition and mechanical properties, production accuracy - normal +/- 1.0%, pipe ends cut off under straight angle On the surface of the Pipes no cracks, film, flaws and laps are allowed.
Separate minor nicks, dents, risks, a thin layer of dross, traces of stripping defects and small caps are allowed, if they do not bring the wall thickness beyond the minus deflections. Pipe shall be able to withstand the bend test.
material: structural carbon steel of high quality, grade 20 (GOST 1050-2013), with carbon content of 0,17 - 0,24%, manganese 0,35 - 0,65% , silicon0,17 - 0,37% , phosphorus 0,035%, chrome to 0,25%, nickel, copper- 0,3%,Brinel hardness 156 MPa, tear resistance 412 MPa, yield strength 245 MPa,relative elongation at break21 %, weldability - no restrictions, flake susceptibility - insensitive.

Pipe 273х8, В 20 Seamless steel pipe (no welding), hot-deformed, round section,outer diameter 273 mm, wall thickness 8 mm, length to 12 м, without heat treatment, group B with standardization on chemical composition and mechanical properties, production accuracy - normal +/- 1.0%, pipe ends cut off under straight angle On the surface of the Pipes no cracks, film, flaws and laps are allowed.
Separate minor nicks, dents, risks, a thin layer of dross, traces of stripping defects and small caps are allowed, if they do not bring the wall thickness beyond the minus deflections. Pipe shall be able to withstand the bend test.
material: structural carbon steel of high quality, grade 20 (GOST 1050-2013), with carbon content of 0,17 - 0,24%, manganese 0,35 - 0,65% , silicon0,17 - 0,37% , phosphorus 0,035%, chrome to 0,25%, nickel, copper- 0,3%,Brinel hardness 156 MPa, tear resistance 412 MPa, yield strength 245 MPa,relative elongation at break21 %, weldability - no restrictions, flake susceptibility - insensitive.

Pipe 325х8, В 20 Seamless steel pipe (no welding), hot-deformed, round section,outer diameter 325 mm, wall thickness 8 mm, length to 12 м, without heat treatment, group B with standardization on chemical composition and mechanical properties, production accuracy - normal +/- 1.0%, pipe ends cut off under straight angle On the surface of the Pipes no cracks, film, flaws and laps are allowed.

И так далее...